H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 16
3
Figure 3 Management IP address configuration page
Table 2 Configuration items
Item Description
Select VLAN Interface
Select a VLAN interface.
Available VLAN interfaces are those configured on the page you enter by selecting
Network > VLAN Interface and clicking the Create tab.
A management IP address is the IP address of a VLAN interface, which can be used to
access the device. You can also configure a VLAN interface and its IP address on the
page you enter by selecting Network > VLAN Interface. For more information, see the
chapter
."
Admin status
Enable or disable the VLAN interface.
When errors occurred on the VLAN interface, disable the interface and then enable
the port to bring the port to work properly.
By default, the VLAN interface is down if no Ethernet ports in the VLAN are up. The
VLAN is in up state if one or more ports in the VLAN are up.
IMPORTANT:
Disabling or enabling the VLAN interface does not affect the status of the Ethernet ports
in the VLAN. The port status does not change with the VLAN interface status.
Configure IPv4
address
DHCP
Configure how the VLAN interface obtains an IPv4 address.
•
DHCP—Specifies the VLAN interface to obtain an IPv4 address
by DHCP.
•
BOOTP—Specifies the VLAN interface to obtain an IPv4 address
through BOOTP.
•
Manual—Allows you to specify an IPv4 address and a mask
length.
BOOTP
Manual
IPv4 address
Specify an IPv4 address and the mask length for the VLAN interface.
Dotted decimal notation is also allowed for the mask length field.
These two options are configurable if Manual is selected.
MaskLen