H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 164)

151
Figure 138 Assign GigabitEthernet 1/0/1 to VLAN 2 as an untagged member
4. Configure voice VLAN on GigabitEthernet 1/0/1:
a. Select Network > Voice VLAN from the navigation tree.
b. Click the Port Setup tab.
c. To configure voice VLAN on GigabitEthernet 1/0/1:
{
Select Manual from the Voice VLAN port mode list.
{
Select Enable from the Voice VLAN port state list.
{
Enter voice VLAN ID 2.
{
Select GE1/0/1 on the chassis front panel.
d. Click Apply.