H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 304)

291
Figure 266 Configure MAC authentication globally
5. In the Ports With MAC Authentication Enabled area, click Add.
6. Select port GigabitEthernet2/0/1, and click Apply.
Figure 267 Enable MAC authentication for port GigabitEthernet 2/0/1
ACL assignment configuration example
Network requirements
As shown in Figure 268 , a host connects to port GigabitEthernet 2/0/1 on the switch and the switch uses
RADIUS servers to perform authentication, authorization, and accounting. Make sure that the switch and
RADIUS server can reach each other.