Configuring nms, Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 131
118
b.
Select the destination IP address type as IPv4/Domain, enter the destination address 1.1.1.2,
enter the user name user1, and select v3 from the Security Model list.
c.
Click Apply
Figure 108 Add target hosts of SNMP traps
Configuring NMS
CAUTION:
The configuration on NMS must be consistent with that on the agent. Otherwise, you cannot perform
corresponding operations.
•
Specify the SNMP version for the NMS as v3.
•
Create an SNMP user user1.
•
Enable both authentication and privacy functions
•
Use MD5 for authentication and DES56 for encryption.
•
Set the authentication key to authkey and the privacy key to prikey.
For information about configuring the NMS, see the manual for the NMS.
Verifying the configuration
•
After the above configuration, the NMS can establish an SNMP connection with the agent and
query and reconfigure values of objects in the agent MIB.
•
If an idle interface on the agent is shut down or brought up, the NMS will receive a trap information
sent by the agent.