H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 109)

96
Energy saving configuration
Energy saving overview
Energy saving allows you to configure a port to work at the lowest transmission speed, disable PoE, or go
down during a specified time range on certain days of a week. The port resumes working normally when
the effective time period ends.
Configuring energy saving on a port
1. From the navigation tree, select Device > Energy Saving to enter the energy saving configuration
page.
2. Click a port.
Figure 79 Energy saving configuration page
3. Configure an energy saving policy for the port as described in Table 30 .
4. Click Apply.