H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 124)

111
Figure 95 Enable SNMP
b. Select the Enable option.
c. Select the v1 or v2c box.
d. Click Apply.
2. Configure an SNMP read-only community public.
a. Click the Community tab.
b. Click Add.
c. Enter the public name public and select Read only from the Access Right list.
d. Click Apply.
Figure 96 Configure read-only community
3. Configure an SNMP read and write community private.
a. Click Add on the Community tab page.
b. Enter the community name private and select Read and write from the Access Right list.
c. Click Apply.