H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 296)

283
Figure 257 Ping operation result
Trace route operation
NOTE:
•
The web interface does not support IPv6 trace route operations.
• Before performing the trace route operation on the Web interface, on the intermediate device execute
the ip ttl-expires enable command to enable the sending of ICMP timeout packets and on the
destination device execute the ip unreachables enable command to enable the sending of ICMP
destination unreachable packets.
1. Select Network > Diagnostic Tools from the navigation tree.
2. Select the Trace Route tab.
The trace route configuration page appears.
Figure 258 Trace route configuration page