H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 63
50
Item Description
Speed
Set the transmission rate of the port.
Available options include:
•
10: 10 Mbps
•
100: 100 Mbps
•
1000: 1000 Mbps
•
Auto: auto-negotiation
•
Auto 10: auto-negotiated to 10 Mbps
•
Auto 100: auto-negotiated to 100 Mbps
•
Auto 1000: auto-negotiated to 1000 Mbps
•
Auto 10 100: auto-negotiated to 10 or 100 Mbps
•
Auto 10 1000: auto-negotiated to 10 or 1000 Mbps
•
Auto 100 1000: auto-negotiated to 100 or 1000 Mbps
•
Auto 10 100 1000: auto-negotiated to 10, 100, or 1000 Mbps
Duplex
Set the duplex mode of the port.
•
Auto: auto-negotiation
•
Full: full duplex
•
Half: half duplex
Link Type
Set the link type of the current port, which can be access, hybrid, or trunk. For more
information, see the chapter "
."
IMPORTANT:
To change the link type of a port from trunk to hybrid or vice versa, you must first set its link
type to access.
PVID
Set the default VLAN ID of the interface. For more information about setting the PVID, see
the chapter "
."
IMPORTANT:
To make sure a link properly transmits packets, the trunk or hybrid ports at the two ends of
the link must have the same PVID.