Poe configuration, Overview, Configuring poe ports – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 450
Advertising
437
PoE configuration
Overview
Power over Ethernet (PoE) means that power sourcing equipment (PSE) supplies power to powered
devices (PDs) from Ethernet interfaces through twisted pair cables.
NOTE:
For more information about PoE, see
H3C WX3000E Series Wireless Switches Switching Engine
Configuration Guide.
Configuring PoE ports
CAUTION:
Before configure PoE, make sure the PoE power supply and PSE is operating normally. Otherwise, you
cannot configure PoE or the configured PoE function does not take effect.
1.
Select PoE > PoE from the navigation tree.
2.
Click the Port Setup tab.
Advertising