H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 66)

53
Item Description
Selected Ports
Interface or interfaces that you have selected from the chassis front panel and the
aggregate interface list below, for which you have set operation parameters
IMPORTANT:
You can set only the state and MAC learning limit for an aggregate interface.
Viewing port operation parameters
Viewing an operation parameter of all ports
1. Select Device > Port Management from the navigation tree.
The Summary tab appears.
2. Select the parameter you want to view by clicking the radio button before it.
The lower part of the page displays the setting of this parameter for all the ports.
Figure 39 The Summary tab