H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 295)

282
5. The above process continues until the ultimate destination device is reached. In this way, the
source device can trace the addresses of all the Layer 3 devices involved to get to the destination
device.
Ping operation
NOTE:
The Web interface does not support the IPv6 ping operations.
1. Select Network > Diagnostic Tools from the navigation tree.
The ping configuration page appears.
Figure 256 Ping configuration page
2. Type the IP address or the host name of the destination device.
3. Click Start to execute the ping command.
4. View the result in the Summary area.