Configuring snmpv1 or snmpv2c, Configuring snmpv3 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 112
99
Configuring SNMPv1 or SNMPv2c
Table 31 SNMPv1 or SNMPv2c configuration task list
Task Remarks
Required
The SNMP agent function is disabled by default.
IMPORTANT:
If SNMP is disabled, all SNMP-related configurations will be removed.
Optional
After creating SNMP views, you can specify an SNMP view for an
SNMP community to limit the MIB objects that can be accessed by the
SNMP community.
Required
Configuring SNMP trap function
Optional
Allows you to configure that the agent can send SNMP traps to the
NMS, and configure information about the target host of the SNMP
traps.
By default, an agent is allowed to send SNMP traps to the NMS.
Configuring SNMPv3
Table 32 SNMPv3 configuration task list
Task Remarks
Required
The SNMP agent function is disabled by default.
IMPORTANT:
If SNMP is disabled, all SNMP-related configurations will be removed.
Optional
After creating SNMP views, you can specify an SNMP view for an SNMP
group to limit the MIB objects that can be accessed by the SNMP group.
Required
After creating an SNMP group, you can add SNMP users to the group
when creating the users. Therefore, you can realize centralized
management of users in the group through the management of the group.
Required
Before creating an SNMP user, you need to create the SNMP group to
which the user belongs.
Configuring SNMP trap function
Optional
Allows you to configure that the agent can send SNMP traps to the NMS,
and configure information about the target host of the SNMP traps
By default, an agent is allowed to send SNMP traps to the NMS.