H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 142)

129
c. Select Trunk from the Link Type list, select the PVID box and enter PVID 100, and select
GigabitEthernet 1/0/1 on the chassis front device panel, as shown in Figure 117 .
d. Click Apply.
Figure 117 Configure GigabitEthernet 1/0/1 as a trunk port and its PVID as 100
2. Create VLAN 2, VLAN 6 through VLAN 50, and VLAN 100:
a. Select Network > VLAN from the navigation tree.
b. Click the Create tab.
c. Enter VLAN IDs 2, 6-50, 100, as shown in Figure 118 .
d. Click Apply.