H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 107)

94
Figure 76 Configure an event group
c. Enter 1-rmon in the Owner Box, and select the box before Log.
d. Click Apply.
The page displays the event entry, and you can see that the entry index of the new event is 1,
as shown in
Figure 77 .
Figure 77 Display the index of a event entry
4. Configure an alarm group to sample received bytes on GigabitEthernet 1/0/1. When the
received bytes exceed the rising or falling threshold, logging is enabled.
a. Click the Alarm tab.
b. Click Add.
The page in
Figure 78 appears.