H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 61)

48
Port management configuration
Overview
You can use the port management feature to set and view the operation parameters of a Layer 2 Ethernet
port or an aggregate interface.
• For a Layer 2 Ethernet port, these operation parameters include port state, speed, duplex mode, link
type, PVID, MDI mode, flow control settings, power save mode, MAC learning limit, and storm
suppression ratios.
• For an aggregate interface, these operation parameters include port state and MAC learning limit.
Setting operation parameters for a port
1. Select Device > Port Management from the navigation tree.
2. Click the Setup tab.
The Setup tab page appears.