H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 266)

253
Figure 226 Create a static address pool
4. Configure the static address pool as described in Table 76 .
5. Click Apply.
Table 76 Configuration items
Item Description
IP Pool Name Enter the name of a static address pool.
IP Address Enter an IP address and select a subnet mask for the static address pool.
The IP address cannot be the IP address of any interface on the DHCP server.
Otherwise, an IP address conflict may occur and the bound client cannot obtain an IP
address correctly.
You can type a mask length or a mask in dotted decimal notation.
Mask
Client MAC Address Configure the client MAC address or the client ID for the static address pool
IMPORTANT:
The client ID must be identical to the ID of the client to be bound. Otherwise, the client
cannot obtain an IP address.
Client ID
Client Domain Name
Enter the domain name suffix for the client.
With the suffix assigned, the client only needs to input part of a domain name, and the
system will add the domain name suffix for name resolution.
Gateway Address
Enter the gateway addresses for the client.
A DHCP client that wants to access an external host needs to send requests to a
gateway. You can specify gateways in each address pool and the DHCP server will
assign gateway addresses while assigning an IP address to the client.
Up to eight gateways can be specified in a DHCP address pool, separated by
commas.