Configuration guidelines – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 186
Advertising
173
Figure 157 Configure MSTP globally (on Switch D)
Configuration guidelines
When you configure MSTP, follow these guidelines:
•
Two devices belong to the same MST region only if they are interconnected through physical links,
and share the same region name, the same MSTP revision level, and the same VLAN-to-MSTI
mappings.
•
If two or more devices have been designated to be root bridges of the same spanning tree instance,
MSTP will select the device with the lowest MAC address as the root bridge.
•
If the device is not enabled with BPDU guard, when a boundary port receives a BPDU from another
port, it transits into a non-boundary port. To restore its port role as a boundary port, you need to
restart the port.
Advertising