Dhcp relay agent configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 285
Advertising
272
Figure 245 Configure attributes for pool2
DHCP relay agent configuration example
Network requirements
As shown in
, VLAN-interface 1 on the DHCP relay agent (Switch A) connects to the network
where DHCP clients reside. The IP address of VLAN-interface 1 is 10.10.1.1/24 and the IP address of
VLAN-interface 2 is 10.1.1.1/24. VLAN-interface 2 is connected to the DHCP server whose IP address is
10.1.1.1/24.
The switch forwards messages between DHCP clients and the DHCP server.
Figure 246 Network diagram
DHCP server
Switch A
DHCP relay agent
DHCP client
DHCP client
DHCP client
DHCP client
Vlan-int2
10.1.1.2/24
Vlan-int1
10.10.1.1/24
Advertising