H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 292)

279
• Defines certificate attribute-based access control policy for the device to control the access right of
the client, in order to further avoid attacks from illegal clients.
Configuring service management
1. Select Network > Service from the navigation tree.
The service management configuration page appears.
Figure 255 Service management
2. Configure the service states as described in Table 85 .
3. Click Apply.
Table 85 Configuration items
Item Description
FTP
Enable FTP service
Specifies whether to enable the FTP service.
The FTP service is disabled by default.
ACL
Associates the FTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button in
front of FTP.
Telnet Enable Telnet service
Specifies whether to enable the Telnet service.
The Telnet service is disabled by default.
SSH Enable SSH service
Specifies whether to enable the SSH service.
The SSH service is disabled by default.
SFTP Enable SFTP service
Specifies whether to enable the SFTP service.
The SFTP service is disabled by default.
IMPORTANT:
When you enable the SFTP service, the SSH service must be enabled.