H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 347
Advertising
334
Figure 325 Configure the RADIUS authentication server
3.
Configure a RADIUS accounting server:
a.
Select Accounting Server as the server type.
b.
Type 192.168.1.2 as the primary server IP.
c.
Type 1813 as the primary server UDP port.
d.
Select active as the primary server status.
e.
Click Apply.
Figure 326 Configure the RADIUS accounting server
4.
On the RADIUS Setup, configure the RADIUS scheme:
a.
Select the server type extended.
b.
Select the Authentication Server Shared Key box, type name in the field, and type name in the
Confirm Authentication Shared Key field.
Advertising