Configuring an snmp user – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 119
Advertising
106
Item Description
Notify View
Select the notify view of the SNMP group, that is, the view that can send trap messages.
If no notify view is configured, the agent does not send traps to the NMS.
ACL
Associate a basic ACL with the group to restrict the source IP address of SNMP packets,
that is, you can configure to allow or prohibit SNMP packets with a specific source IP
address, so as to restrict the intercommunication between the NMS and the agent.
Configuring an SNMP user
1.
Select Device > SNMP from the navigation tree.
2.
Click the User tab.
The User tab page appears.
Figure 89 SNMP user
3.
Click Add.
The Add SNMP User page appears.
Advertising