H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 259
Advertising
246
Figure 221 Configure a default route
2.
Configure a static route to Switch A and Switch C respectively on Switch B:
a.
After you log in to the Web interface of Switch B, select Network > IPv6 Routing from the
navigation tree.
b.
Click the Create tab.
c.
To configure a static route to Switch A and Switch C respectively on Switch B:
{
Type 1:: for Destination IP Address.
{
Select 64 from the Prefix Length list.
{
Type 4::1 for Next Hop.
d.
Click Apply.
Advertising