H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 221)

208
Figure 184 The page for configuring ports
3. Configure the voice VLAN function on the two ports:
a. Select Network > Voice VLAN from the navigation tree.
b. Click the Port Setup tab.
c. To configure the voice VLAN function on the two ports:
{
Select Auto from the Voice VLAN port mode list.
{
Select Enable from the Voice VLAN port state list.
{
Enter the voice VLAN ID 2.
{
Click to select port GE1/0/1 and GE1/0/2 from the chassis front panel.
d. Click Apply.