H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 320)

307
Figure 286 802.1X configuration of GigabitEthernet 1/0/1
Configuring the RADIUS scheme system
1. From the navigation tree, select Authentication > RADIUS.
The RADIUS server configuration page appears.
2. Configure the authentication server:
a. Select the server type Authentication Server.
b. Type the primary server IP address 10.1.1.1.
c. Select active as the primary server’s status.
d. Type the secondary server IP address 10.1.1.2.
e. Select active as the secondary server’s status.
f. Click Apply.