H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 125)

112
Figure 97 Configure read and write community
4. Enable the agent to send SNMP traps.
a. Click the Trap tab.
b. Select the box of Enable SNMP Trap.
c. Click Apply.
Figure 98 Enable SNMP traps
5. Add target hosts of SNMP traps.
a. Click Add on the Trap tab page.
The page in
Figure 99 appears.
b. Select the destination IP address type as IPv4/Domain, enter the destination address 1.1.1.2,
enter the security name public, and select v1 from the Security Model list.
c. Click Apply.