H3C Technologies H3C SecCenter UTM Manager - Manual (Page 219)

211
Predefined services
The predefined services are displayed by default when you select Services under Security Policy
Management. See Figure 206 . You can view predefined services but cannot delete or modify them.
Table 186 describes the fields of the service list.
Table 186 Fields of the predefined service list
Field Description
Name Name of the service
Protocol Protocol used by the service
Protocol Parameters Parameters configured for the protocol
Return to Service management functions .
User-defined services
From the navigation tree of the firewall management component, select Services under Security Policy
Management. Click the User-Defined Services tab to enter the user-defined service management page,
as shown in
Figure 207 . Table 187 describes the fields of the service list.
Figure 207 User-defined service management page
Table 187 Fields of the user-defined service list
Field Description
Name Name of the user-defined service
Description Descriptive information about the user-defined service
Protocol Protocol used by the user-defined service
Protocol Parameters Parameters configured for the protocol
Referenced Whether the user-defined service is referenced or not
Operation Click the icon to modify the service.
To add a user-define service, click Add on the user-defined service management page to enter the Add
User-Defined Service page and configure the service as described in Table 188 .