H3C Technologies H3C SecCenter UTM Manager - Manual (Page 46)

38
Table 34 Operator configuration items
Item Description
Login Name Type a name for the operator, a string of up to 40 characters.
Login Password
Specify a password for the operator to use at login.
IMPORTANT:
The password must comprise 6 to 20 alphanumeric characters, and its
strength must meet the password strength requirements of the device.
Confirm Password
Type the password again, which must be the same as that for Login
Password. If the two are not the same, an error message will appear,
telling you that they must be identical.
Role Select an operation level for the operator.
Manage Device Group
Specify which device group the operator can manage. The added
operator can perform only authorized operations for only the devices in
the selected device group. Thus, different operators manage different
devices and perform different operations.
Authentication Mode
Select an authentication mode for the operator.
Available authentication modes include local authentication and LDAP
authentication. If you select LDAP authentication, you must also select an
LDAP server.
Return to Operator management functions .
Managing operation logs
Configuration guide
Operations performed by all operators are recorded in operation logs. The super administrator can view
operation logs, query logs by different conditions, and delete logs.
From the navigation tree of the system management component, select Operation Logs under Operator
Management. The operation log management page appears, as shown in Figure 35 . Table 35 describes
the operation log query options. You can use any combination of the options to query for the logs of
interest. Table 36 describes the fields of the operation log list.
Figure 35 Operation log management page