H3C Technologies H3C SecCenter UTM Manager - Manual (Page 31)

23
Item Description
Error Handling
Required when the deployment mode is Serial.
Specify the error handling scheme to be used when a deployment error occurs.
Deployment Policy
Required
Select the actions to be taken after deploying the software selected in the Deploy
Software Version column.
• Set the currently running software as the backup startup
software—Specifies secpath1000fe-cmw520-b5002.bin as the main startup
software and the current running software as the backup startup software.
• Delete software that is currently running—Specifies
secpath1000fe-cmw520-b5002.bin as the main startup software and
deletes the current running software from the device.
• Delete startup software that is currently backup—Specifies
secpath1000fe-cmw520-b5002.bin as the main startup software, deletes the
backup startup software from the device, and leaves the current running
software on the device.
• Reboot the device immediately after deploying—Specifies
secpath1000fe-cmw520-b5002.bin as the main startup software, leaves all
software files stored on the device, and reboots the device. After the device
reboots, secpath1000fe-cmw520-b5002.bin is the current running software
of the device.
Deployment Time Specify the execution time of the deployment task.
NOTE:
You must select a software version for the Deploy Software Version field before deploying software to
devices.
Return to Device software management functions .
Backing up the software of devices
On the device software management page, select devices and then click Backup Device Software to
back up the software of the selected devices. The Import from Device page appears with the operation
results, as shown in Figure 19 . Table 14 describes the fields of the software backup result list.
Figure 19 Software backup result
If the backup operation fails, the system shows the reasons. The software backup files are stored in the
software database.