H3C Technologies H3C SecCenter UTM Manager - Manual (Page 59)

51
• Click the icon of a segment to modify the segment.
• Click the icon of a segment to delete the segment.
Adding a segment
Follow these steps:
1. From the navigation tree of the system management component, select Segment Configuration
under System Config.
2. Click Add to enter the segment configuration page, as shown in Figure 48 .
3. Specify a segment ID and an alias for the segment. A segment ID is an integer in the range 0 to
255.
4. Click Add.
Figure 48 Add a segment
CAUTION:
This feature is used in the bandwidth management component.
Monitoring the disk space
This function provides the usage statistics of the disk space under the system installation directory. It
allows you to set the minimum free disk space, so that an alarm is generated whenever the free disk
space is less than the threshold. You can also specify an email address so that the system sends
generated alarms to the mail box. This function helps reduce data loss due to lack of disk space.
Follow these steps:
1. From the navigation tree of the system management component, select Disk Monitoring under
System Config. The disk space alarm configuration page appears, as shown in
Figure 49 .
2. Set the disk space alarm threshold and specify the alarm mode. Table 47 describes the alarm
configuration items of the disk space for logs.
3. Click Apply.
The system will issue an alarm whenever the free disk space is less than the threshold.