Nortel Networks Circuit Card - Manual (Page 117)

Option settings Page 117 of 906
Circuit Card Description and Installation
NT5D2101/NT9D1102 Core/Network module backplane
NT6D68 Core module backplane
Table 28
NT5D2101/NT9D1102 Core/Network module backplane
Jumper
Location
(between slots) Core/Network 1 Core/Network 0
JB1 14/15 Jumper plug not installed Plug installed
Note: Berg jumper is located at the bottom of the primary side of the backplane. (This is inside
the card cage assembly.)
Table 29
NT6D68 Core module backplane
Jumper
Location
(between slots) Core 1 Core 0
JB4
JB3
JB2
JB1 9 / 10
10 / 11
11 / 12
12 / 13
Jumper plug not installed
Plug installed
Plug installed
Plug installed
Plug installed
Plug installed
Plug installed
Plug installed
Note: Berg jumpers are located along the bottom of the primary side of the backplane. (This is
inside the card cage assembly.)