Software description, Hardware description, Ntrb21 tmdi card – Nortel Networks Circuit Card User Manual

Page 831: Architecture, Signaling interface, Interconnection

Advertising
background image

NTRB21 DTI/PRI/DCH TMDI card

Page 831 of 906

Circuit Card

Description and Installation

Software description

Changes from the NTAK09 are required for the new trunk card and License
parameters are n service change and maintenance overlays. There is a change
to CardLAN to introduce a new CardLAN ID. The download of PSDL data
is also changed to handle a 32 bit download as well as existing 16 bit.

Hardware description

NTRB21 TMDI card

The NTRB21 TMDI card provides 1.5 MBits Digital Trunk Interface or
Primary Rate Interface functionality. It also has a built-in downloadable
D-channel.

The NTRB21 can be used with the NTAK09 DTI/PRI card (with the
NTBK51 downloadable D-channel daughterboard).

Figure 178 on

page 832

shows a faceplate of the NTRB21 TMDI card.

Architecture

Signaling interface

The signaling interface performs an 8 Kbps signaling for all 24 channels and
interfaces directly to the DS-30X link. Messages transmitted in both
directions are three bytes long.

Interconnection

The interconnection to the carrier is by NTBK04, a 1.5 Mb 20 ft. carrier cable.
The NT8D97AX, a fifty-foot extension cable, is also available.

Advertising