Nortel Networks Circuit Card - Manual (Page 230)

Page 230 of 906 NT5D11 and NT5D14 Lineside T1 Interface cards
553-3001-211 Standard 3.00 August 2005
C E Clear Error
Clears the error counter for the T1.
D A [P] Display Alarms [Pause]
Displays the alarm log – a list of the most recent 100 alarms along with time and
date stamps.
D C Display Configuration
Displays the configuration settings for the cards including:
• the serial number of the card
• MMI firmware version
• date and time
• alarm enable/disable setting
• self-clearing enable/disable setting
• settings entered in Set Configuration
• dip switch settings
D H [P] Display History [Pause]
Displays performance counters for the past 24 hours.
D P Display Performance
Displays performance counters for the current hour.
D S [P] Display Status [Pause]
Displays carrier status, including whether the card is in the alarm state, and what
alarm level is currently active.
H or ? Help
Displays the help screen.
L Login
Logs into the MMI terminal when the system has one lineside T1 card.
Table 88
MMI commands and command sets (Part 2 of 3)
Command Description