Digital line interface specifications – Nortel Networks Circuit Card User Manual
Page 537

NT8D02 and NTDK16 Digital Line cards
Page 537 of 906
Circuit Card
Description and Installation
Digital line interface specifications
Table 173 provides a technical summary of the digital line cards.
Table 173
NT8D02/NTDK16 Digital Line card technical summary
Characteristics
NT8D02 DLC
description
NTDK16BA DLC
description
NTDK16AA DLC
description
Units per card
16 voice, 16 data
48 voice, 48 data
48 voice, 48 data
Impedance
100 Ohm j/b ohm
100 Ohm j/b ohm
100 Ohm j/b ohm
Loop limits
30 m (100 ft) to 915
m (3000 ft) with 24
AWG PVC cable
(+15 V DC at 80 mA)
30 m (100 ft) to 915
m (3000 ft) with 24
AWG PVC cable
(+15 V DC at 80 mA)
30 m (100 ft) to 915
m (3000 ft) with 24
AWG PVC cable
(+15 V DC at 80 mA)
0 to 1070 m (3500 ft)
with 24 AWG PVC
cable (+15 V DC at
80 mA)
0 to 1070 m (3500 ft)
with 24 AWG PVC
cable (+15 V DC at
80 mA)
0 to 1070 m (3500 ft)
with 24 AWG PVC
cable (+15 V DC at
80 mA)
Line rate
512 kbps + 100 ppm
512 kbps + 100 ppm
512 kbps + 100 ppm
Power supply
+ 5 V DC
+15 V DC
+10 V DC
+ 5 V DC
+15 V DC
+ 5 V DC
+15 V DC
+8 V DC
Transmitter output
voltage:
• successive “1”
bits
+1.5 + 0.15 V and
-1.5 + 0.15 V
• “0” bits
0 + 50 mV
Additional circuitry
Not applicable
Not applicable
Power Failure Trans-
fer Control Ring
Sync.