Nortel Networks Circuit Card User Manual
Page 839
Page 839 of 906
Circuit Card
Description and Installation
844
NTVQ01xx Media Card
Contents
This section contains information on the following topics:
Physical description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hardware architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Physical description
The Media Card replaces the ITG Pentium card and is available as an 8-port
or 32-port card.
You can install this card in slots 1 through 4 in the MG 1000S or slots 7
through 10 in the MG 1000S Expansion.
Note: Up to four Media Cards can be installed in each MG 1000S. Up to
four Media Cards can be installed in each MG 1000S Expansion.
An NTVQ01xx Media Card is shown in Figure 179.