Mg 1000s/expansion card slot assignment – Nortel Networks Circuit Card User Manual
Page 821
NTDK20 Small System Controller card
Page 821 of 906
Circuit Card
Description and Installation
The MG 1000S 10BaseT port can run in Normal mode or Survival mode. In
Normal mode, the MG 1000S does not provide access to maintenance or
alarm management.
External connections to the 10BaseT port are provided by a 15-pin connector
located on the backplanes of the Call Server and MG 1000S systems.
MG 1000S/Expansion card slot assignment
The MG 1000S and MG 1000S Expansion contain physical card slots,
numbered 1 to 10. See Figure 174 on
When configuring the system, the physical card slot numbers must be
transposed to “logical” card slot numbers. For example, to configure a card
physically located in Slot 2 of the first MG 1000S, use logical Slot 12. To
configure a card physically located in Slot 2 of the second MG 1000S, use
logical Slot 22. See Table 261 on
.