Nortel Networks Circuit Card - Manual (Page 520)

Page 520 of 906 NT7D16 Data Access card
553-3001-211 Standard 3.00 August 2005
DLNG (ENG) FRN Data port language, where:
ENG = English
FRN = Quebec French
KBD (ON) OFF Keyboard dialing, where:
ON = enabled
OFF = disabled (Hayes dialing commands will still work)
WIRE (OFF) ON Wire test mode, where:
OFF = disabled
ON = enabled
PBDO (OFF) ON Port busy upon DTR off, where:
OFF = disabled (port busy on with DTR)
ON = enabled (port busy off with DTR)
This prompt appears only if TYPE = R232
PBDO = OFF for any RS-232-C mode besides 8, or 12
If PBDO = ON, key 7 = MSB
KEY
0 SCR xxxx
1 SCR xxxx
2 TRN
3 ADL yy xxxx
4 RGA
5 SCC 0-253
6 DSP
7 MSB
Key settings
Primary data DN
Secondary Data DN
Call Transfer
Autodial
Ring Again
Speed Call Controller, list number
Display
Make Set Busy
Primary and secondary data DNs must be single
appearance DNs. Feature key assignment must be as
shown here.
LD 11 – Configure Data Access card. (Part 3 of 3)
Prompt Response Description