Nortel Networks Circuit Card - Manual (Page 418)

Page 418 of 906 NT6D80 MSDL card
553-3001-211 Standard 3.00 August 2005
Disabling the MSDL
To disable an MSDL card, enter DIS MSDL x .
To disable the MSDL and all its ports, enter DIS MSDL x ALL .
Resetting the MSDL
To reset an MSDL and initiate a limited self-test, the MSDL must be in a
manually disabled state. To perform the reset, enter
RST MSDL x .
Displaying MSDL status
To display the status of all MSDL cards, enter STAT MSDL .
To display the status of a specific MSDL, enter STAT MSDL x . The status of
the MSDL, its ports, and the operation of each port appears.
The command STAT MSDL x FULL displays all information about an MSDL
(card ID, bootload firmware version, base code version, base code state,
operation state, date of base code activation) as well as the version, state, and
activation date for each card operation.
Self-testing the MSDL
To perform extensive self-testing of an MSDL, enter SLFT MSDL x . This test
can be activated if the card is in the manually disabled state. If the test passes,
the system outputs the card ID and a pass message. If it fails, the system
displays a message indicating which test failed.