Nortel Networks Circuit Card - Manual (Page 298)

Page 298 of 906 NT5D33 and NT5D34 Lineside E1 Interface cards
553-3001-211 Standard 3.00 August 2005
unable to accept new calls. Set this value to N if this state is not needed. If this
value is not set to N, then dip switch #2 position 6 will determine whether
off-hook or on-hook is sent to the M1/SL100 when this state is entered. See
Table 99 on
page 270 .
Figure 51
Set Mode (S M): Table screen
LEI: >S M
1)
D efault
2) T able
Hit <CR> to accept current value or type i n a new one.
Curr ent Mode : 1
New Mode : 2
Sign aling Bi ts set to Table .
Inco ming and outgoi ng calls are in referen ce to th e CPE.
All ABCD bit s are w ith resp ect to S ENDing from LEI /M1 to C PE
or R ECEIVing from C PE to LE I/M1.
Plea se enter new AB CD bits or hit < CR> to accept. You may
ente r 2 or 4 values . If on ly 2 val ues are entered , the A and
B bi ts will be copi ed to th e C and D bits.
IDLE SEND: Current : 0000 New: 010 1
IDLE SEND bi ts chan ged to: 0101
IDLE RECEIVE : Curr ent: 010 1 New:
IDLE RECEIVE bits u nchanged .
BLOC KING REC EIVE en abled? ( Y/N): N
BLOC KING REC EIVE is disable d.
Inco ming cal l RINGE R-ON SEN D: Curr ent: 00 00 New:
Inco ming cal l RINGE R-ON SEN D bits n ot chan ged.
Inco ming cal l RINGE R-OFF SE ND: Cur rent: 0 101 New : 0101
Inco ming cal l RINGE R-OFF SE ND bits not cha nged.
Inco ming cal l OFFHO OK RECEI VE: Cur rent: 1 111 New : 11
Inco ming cal l OFFHO OK RECEI VE bits not cha nged.
Inco ming cal l CONNE CTED SEN D: Curr ent: 01 01 New:
Inco ming cal l CONNE CTED SEN D bits n ot chan ged.
Inco ming cal l (Far End) DIS CONNECT SEND: Current: 1111 N ew:
Inco ming cal l (Far End) DIS CONNECT SEND bi ts not c hanged.
Inco ming cal l (CPE) DISCONN ECT RECE IVE: C urrent: 0101 Ne w:
Inco ming cal l (CPE) DISCONN ECT RECE IVE not changed .