INFICON 3000 Micro GC Gas Analyzer Operating Manual - Manual (Page 121)

6 - 13
PN
07
4-
51
9-
P1
C
3000 Micro GC Operating Manual
6.5 Change IP Address
6.5.1 IP Configuration
The 3000 Micro GC IP address can be changed through the embedded web page.
1 Open the web browser.
2 In the address bar, type the current IP Address of the instrument. Press Enter.
See
Figure 6-17 .
NOTE: At the factory, the instrument IP address was set to 10.1.1.101.
Figure 6-17 Internet Explorer address bar
3 The instrument embedded web page will display. Click the IP Configuration
tab. See Figure 6-18 .
4 Click Make Changes . See Figure 6-18 .
Figure 6-18 IP configuration page