INFICON 3000 Micro GC Gas Analyzer Operating Manual - Manual (Page 146)

7 - 18
PN
07
4-
51
9-
P1
C
3000 Micro GC Operating Manual
7.6.4 View Instrument Status
Click Control >> Instrument Status to view 3000 Micro GC status. See Figure
7-21 .
Figure 7-21 Instrument status window - not ready
NOTE: The status will read Not Ready (highlighted in yellow) if parameters have
not reached their set points. Parameters that are changing are highlighted
in yellow. A run cannot be started unless the status reads Ready
(highlighted in green). See
Figure 7-22 .
Figure 7-22 Instrument status window - ready