3 adding groups – INFICON 3000 Micro GC Gas Analyzer Operating Manual User Manual
Page 161
Advertising
7 - 33
PN
07
4-
51
9-
P1
C
3000 Micro GC Operating Manual
7.11.2.3 Adding Groups
To add a group:
1
Click Method >> Peaks/Groups from the toolbar.
2
Click the Groups tab. See
Figure 7-41 Groups tab
3
Type the name of the group in a blank box.
4
In the Group Type list, select Calibrated Range.
5
Click the blue arrow on the right of the Group Def. field. The Group Range
Definition window will display. See
.
Figure 7-42 Define group range
6
Type a Region Start and Region Stop in minutes or seconds.
NOTE: In the example shown in Figure 7-41, the Region Start and Region
Stop are displayed in seconds.
7
Select Calculate concentrations for unnamed peaks in group.
8
Click OK to return to the Groups tab.
Advertising