INFICON 3000 Micro GC Gas Analyzer Operating Manual - Manual (Page 235)

9 - 7
PN
07
4-
51
9-
P1
C
3000 Micro GC Operating Manual
TCD detector 'fault'
(continued) Malfunctioning column or
injector Check the flow coming out of the
3000 Micro GC analytical and reference
vents. If there is no flow from either or both
vents, contact
INFICON .
Malfunctioning TCD Contact INFICON .
Method fields do not appear Instrument not properly
configurated
Re-configure the instrument through EZ IQ
Config.
Conflicting module
addresses Ensure the DIP switch is set to the correct
address for enhanced modules.
Corrupted software file Re-install EZ IQ. Refer to the
074-537 EZ IQ Installation Guide.
Table 9-2 Common software problems (continued)
Symptom Cause Remedy