INFICON 3000 Micro GC Gas Analyzer Operating Manual - Manual (Page 134)

7 - 6
PN
07
4-
51
9-
P1
C
3000 Micro GC Operating Manual
4 Select the desired parameters. See Table 7-1 for a list of parameters.
5 Click Set Config to set the configuration of the valve. See Figure 7-9 .
Figure 7-9 Configuration window - set config
6 The VICIValve window will display to confirm configuration completion.
Click OK. See
Figure 7-10 .
Figure 7-10 VICIValve window - set config done
Table 7-1 Parameters
Name Description
Model Identifies the name of the valve model. Other configuration items will be
unavailable until the Model is selected.
# Posns Number of ports for the valve, from the drop-down list.
Port Communications Port for the valve, from the drop-down list.
Baud Rate Baud Rate, or symbols per second, for communicating with the valve.
Consult valve documentation.
Rotation Specifies what direction the valve will rotate when it changes positions.
Name Identifies the user-supplied name for the valve.