INFICON 3000 Micro GC Gas Analyzer Operating Manual User Manual
Page 155
7 - 27
PN
07
4-
51
9-
P1
C
3000 Micro GC Operating Manual
5
Click Available Annotation then select which features to annotate. For
example, selecting Retention Time will display the retention times above the
integrated peaks.
6
When an annotation is highlighted, click the green arrow to move the
annotation from Available Annotations to Show the following annotations.
Alternatively, double-click the annotation. See
NOTE: For certain annotations, the number of decimal places can be
designated. Type this value in the
Decimals box for the highlighted
annotation.
Figure 7-34 Trace annotation properties window
7
Select the check box(s) to display Baseline, USP Width, Retention Time
Window, Show undetected named peaks, and Group Range on the
chromatogram.
NOTE: The RT window annotation displays the window set in the peak table.
This window is not adjusted for relative retention time.
8
When finished selecting annotations, click Apply To All or OK.