INFICON 3000 Micro GC Gas Analyzer Operating Manual - Manual (Page 251)

11 - 3
PN
07
4-
51
9-
P1
C
3000 Micro GC Operating Manual
11.2 GC Modules
The GC module assembly contains the injector, column, column heater, detector,
and connecting tubing
.
11.2.1 Description of GC Module Numbers
GC module numbers are referenced in this section. A short description of each
GC module number is provided.
11.2.1.1 Reference Number on Top of GC Module
This is not an orderable part number. It is used for INFICON internal reference only.
11.2.1.2 New Module Part Number
Use this part number when ordering a new module from INFICON. A new module
may be stored as a spare, or swapped with an existing module in a 3000 Micro GC.
11.2.1.3 Refurbished Module Part Number
INFICON offers fast service turn-around with an Exchange Module Program. Used
modules can be refurbished in an INFICON repair center to meet the urgent needs
of the customer. To leverage the fast turn around of a refurbished or exchange
module, customers can order a refurbished module using the Refurbished
Module Part Number. Once the refurbished module is received, the
corresponding defective module must be returned to INFICON.
In addition, the refurbished module will have the Refurbished Module Part Number
label adhered on top of it for proper identification.
11.2.1.4 New Module Replacement Part Number:
Direct replacement modules are available for discontinued modules. The new part
numbers for these replacement modules can be found in
section 11.2.6,
Discontinued Module Replacement IPNs, on page 11-14 .