INFICON 3000 Micro GC Gas Analyzer Operating Manual - Manual (Page 5)

DECLARATION
OF
CONFORMITY
This is to certify that this equipment manufactured by:
INFICON Instruments ( Shanghai ) Co., Ltd
Section B, 1/F, No.11 Building, 201 Min Yi Road
Shanghai, 201612,
China
Meets the essential safety requirements of the European Union and is placed on the market accordingly. It has
been constructed in accordance with good engineering practice in safety matters in force in the Community and
does not endanger the safety of persons, domestic animals or property when properly installed and maintained and
used in applications for which it was made.
In addition, this is to certify that this equipment has also been designed and manufactured; having regard to the
state of the art, to ensure complies with the Protection Requirements of EMC Directive 2004/108/EC.
A Technical Documentation File is also available for review by competent authorities and will be maintained for a
period of ten years after the date on which the equipment was last manufactured. In additional to this file,
technical, installation, maintenance and application information concerning this equipment can also be found in the
Operating Manual(s) for this product or product family.
Equipment Description:
INFICON 3000 Micro Gas Chromatograph, INFICON 3000 Natural Gas Analyzer.
Including all standard options and accessories.
Applicable Directives: Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
Applicable Standards:
Safety: IEC 61010-1:2001 / EN 61010-1:2001
2)
EMC: IEC 61326-1:2005 EN 61236-1:2006
Standard Limit
CISPR11:2003 EN55011:1998+A1:1999+A2:2002
1)
CE Implementation Date: 17 November 2009
Authorized Representative: Jerry Wander Stephen Chabot
______________________________ ____________________________
Business Line Manager, ISS Vice President, Operations
INFICON Inc. INFICON Inc.
ANY QUESTIONS RELATIVE TO THIS DECLARATION OR TO THE SAFETY OF INFICON'S PRODUCTS SHOULD BE DIRECTED, IN
WRITING, TO THE QUALITY ASSURANCE DEPARTMENT AT THE ABOVE ADDRESS.
Revised 2010/06/17 (Rev A)
Design Control Authority
INFICON Inc.
Two Technology Place
East Syracuse, NY 13057
USA