INFICON 3000 Micro GC Gas Analyzer Operating Manual - Manual (Page 23)

1 - 5
PN
07
4-
51
9-
P1
C
3000 Micro GC Operating Manual
WARNING
3000 Micro GC has inlets which can be heated to 140 ° C.
Touching the inlets once they are at operating
temperatures can result in injury. Extreme care should be
taken to avoid touching the inlets.
WARNING
Do not operate in an explosive environment or in the
presence of flammable gases or fumes. Operation of any
electrical instrument in such environments constitutes a
safety hazard.
WARNING
Use only the INFICON supplied power source. Use of any
other power supply could result in catastrophic failure of
the electrical system and may cause personal injury.
WARNING - Risk Of Electric Shock
Always disconnect the power supply before replacing or
touching any components.
WARNING
Hot surfaces. Many parts of 3000 Micro GC operate at
temperatures high enough to cause serious burns. These
parts include, but are not limited to: the inlet port, the
inlet manifold, the GC module, the column nuts attaching
the module to an inlet or a vent. Extreme care should be
taken to avoid touching these heated surfaces.
WARNING
Do not operate the instrument with the GC module
disassembled. Column temperatures can reach 180
° C.