5 installing the sample inlet filter, 1 sample inlet filter parts list, Figure 4-7 – INFICON 3000 Micro GC Gas Analyzer Operating Manual User Manual
Page 68: Warning
4 - 12
PN
07
4-
51
9-
P1
C
3000 Micro GC Operating Manual
Figure 4-7 Portable 3000 Micro GC, back view
4
Set the carrier switch on the front of Portable 3000 Micro GC to ON.
5
Connect sample gases.
WARNING
If a hazardous sample is used, the sample exhaust must
be vented to a fume hood or other designated area for
hazardous waste disposal.
4.2.5 Installing the Sample Inlet Filter
3000 Micro GC is shipped with an external 10 micron sample inlet filter assembly,
one dual-ended ferrule per sample inlet, and extra replacement filter disks.
4.2.5.1 Sample Inlet Filter Parts List
Analytical column vents
Reference column vents
Sample pump vents
CARRIER OUT port
Carrier jumper tube
CARRIER IN ports
for onboard cylinder
Table 4-2 Sample inlet filter parts list
Description
PN
Sample Inlet Filter Assembly
G2801-60900
Dual-Ended Ferrule
FRL-1269
Replacement Filter Disks (5/pk)
5183-4652