2 graphically programming integration events – INFICON 3000 Micro GC Gas Analyzer Operating Manual User Manual
Page 153
7 - 25
PN
07
4-
51
9-
P1
C
3000 Micro GC Operating Manual
7.10.3.2 Graphically Programming Integration Events
1
Right-click on the chromatogram and select the desired integration event under
Graphical Programming.
2
A blue window will display (see
). Using the pointer, select a position
for the Start Time and the Stop Time on the chromatogram for the specific
event.
Figure 7-30 Blue window for graphical programming
3
Once Start Time and Stop Time are selected, a window will display with the
times (see
). Verify the Start Time, Stop Time, and Value. Click
Analyze Now to close the window.
Figure 7-31 Example window for graphical programming
All events added through Graphical Programming will be added to the
method Integration Events table by default. There is an option to Add event
to this data file only. Refer to
.
4
To save the method, click File >> Method >> Save.