Yaskawa iQpump Programming Manual User Manual
Page 28
Advertising
28
YASKAWA
TM.iQp.02 iQpump Drive Programming Manual
■
b5-17 PI Accel/Decel Time
Setting Range:
0.0 to 25.5 sec
Factory Default: 0.0 sec
This is a soft start function that is applied to the PI setpoint analog input. Instead of having nearly instantaneous changes in signal levels,
there is a programmed ramp applied to level changes. When changing setpoints the error can be limited by gradually ramping the setpoint
through the use of parameter b5-17.
Advertising
This manual is related to the following products: